---
title: "How to Furnish a Room With AI and Real IKEA Pieces | Carlos Lastres"
description: "My reel furnished an empty Tokyo high rise room by room with AI and 17 real IKEA pieces, prices on screen. How to do it with a room you actually have: the photo, real products with"
url: https://lastres.ai/blog/furnish-a-room-with-ai-and-ikea/
lang: en
---

Carlos Lastres 20 November 20261,203 words

# How to Furnish a Room With AI and Real IKEA Pieces

The reel started with an empty high rise flat in Tokyo, Tokyo Tower in the window and nothing on the floor. Then AI furnished it one room at a time: the living room, the dining room, the bedroom. Every piece was a real IKEA product with its price in yen, and at the end the whole flat came to 17 pieces and almost ¥1.3 million.

That flat is not mine. The empty rooms were generated too, so I could show a big space without walking into a stranger's apartment. The furniture is the real part. Below is how to do the same thing with a room you actually have, with a phone, an AI image tool and a tape measure.

## Start with the empty room

The reel shows the living room before anything goes in. Your version of that shot matters more than any prompt you write later, because the AI keeps your walls, windows and floor and only adds furniture on top.

![An AI generated empty living room in a Tokyo high rise, herringbone floor and floor to ceiling windows facing Tokyo Tower](https://lastres.ai/blog/furnish-a-room-with-ai-and-ikea/living-before.jpg)

1. Clear the room as much as you can. Boxes and laundry confuse the model about where the floor ends.
2. Stand in a corner and shoot toward the opposite corner, phone at chest height. You want two walls and a lot of floor in the frame.
3. Use daylight and the normal 1x lens. The ultra wide lens bends the walls and makes the room look bigger than it is.
4. Measure the room with a tape: the width and depth of the floor, plus the width of the window or door you see in the photo. Write the numbers down. You will need them later, and the photo cannot give them to you.

## Pick real pieces, with their sizes

This is where most AI room makeovers go wrong. You ask for a cozy Scandinavian living room, you get something beautiful, and none of it exists. You cannot buy it, and you have no idea if it would fit.

So pick the products first and only then make the picture. For each room in the reel I picked six pieces from IKEA Japan: in the living room a corner sofa, a coffee table, a rug, a TV bench, a floor lamp and a plant. For each one, keep a short list:

- the product name and the link to its page
- width, depth and height, from the measurements on the product page
- the price, and how many you need
- one clean product photo

I kept it to six pieces per photo. The more you add, the more likely the model is to shrink a piece, drop it, or squeeze it into a strange spot. If a room needs more, make a second picture from the same empty photo with the rest of the list.

## Generate the furnished room

Then comes the "this is what it gave me back" part. You need an image model that accepts several photos at once. The Gemini app does, according to [Google's own help page](https://support.google.com/gemini/answer/14286560): you upload multiple images and ask it to create a new image based on them. Use the Flash or Pro setting, since Google says the Lite image model is not designed for multiple reference images.

Upload the empty room first and the product photos after it, then write something like this:

```
Image 1 is my empty living room. Images 2 to 7 are furniture I plan
to buy. Put exactly these pieces in the room in image 1 and nothing
else. Keep the walls, windows, floor and camera angle the same.
Keep each piece's shape, color and proportions as in its photo.
Sizes: coffee table 180 x 59 cm, rug 240 x 300 cm,
TV bench 223 x 42 cm. The room is 420 cm wide.
```

Replace the sizes with yours. Giving the model the numbers does not make it measure anything, but it keeps it from turning a three seat sofa into a loveseat.

![The same AI generated living room furnished with a gray corner sofa, an oval coffee table, a green striped rug, a TV bench, a floor lamp and a potted plant](https://lastres.ai/blog/furnish-a-room-with-ai-and-ikea/living-after.jpg)

Then the dining room, then the bedroom, the same way: one empty photo and one short list per room. Keeping each room separate also keeps each picture easy to check.

Look at the result next to each product photo. If the rug changed color or the TV bench grew a door it does not have, ask for that one fix. Do not ask it to add more furniture to a picture that is already full. In my tests that is when things end up on top of each other.

## Check what fits

The reel says the AI tells you what fits in each space, and the small print on screen says the sizes are estimated from the photo. That small print is why you measured. A picture can look perfect while the sofa in it is a meter too long for your wall.

So do the boring check with the numbers you wrote down. Add up the widths of everything that goes along the same wall and compare it with the wall. Check the depth of the sofa plus the coffee table plus a walkway against the depth of the room. Check that doors and drawers can open. If the sum does not work on paper, it will not work in the room, no matter how good the render looks.

## Add up the total

The last scene of the reel is the total. It is a plain sum: price times quantity for each piece, then everything together. In the reel the living room alone was ¥518,360 and the three rooms came to ¥1,285,250 for 17 pieces, at the prices IKEA Japan listed when I built it in October. Prices change, so check each one on the store's page before you buy. Delivery and assembly are not in that number.

![A frame from the reel: six IKEA pieces for the living room with names, yen prices, some sizes, fit badges and a note in Spanish that the sizes are estimated from the photo](https://lastres.ai/blog/furnish-a-room-with-ai-and-ikea/living-price-list.jpg)

A spreadsheet is enough. One row per piece, a column for the link, the size, the price and the quantity, and a sum at the bottom. It is also the list you take to the store.

## One photo, if you live in Japan

At the end of the reel I said I wanted all of this from a single photo, and that I am building my own app for it. That app is [Heya AI](https://intdesign.jp/heya/), and it is live on the [Japanese App Store](https://apps.apple.com/jp/app/heya-ai/id6822410101) for iPhone, in English and Japanese. It is only available in Japan, because the furniture comes from stores here.

The steps are the same as above, done for you. You choose what the photo shows, like a living room or a bedroom, take the photo and pick a style. Heya estimates the size of the room from the photo, picks real products, makes the redesign, and lists every piece with its name, price and size and whether it fits. A floor plan lets you drag and rotate pieces. The first redesign is free.

Outside Japan, the closest thing from a store itself is [IKEA Kreativ](https://www.ikea.com/in/en/customer-service/knowledge/articles/ec8c6ace-ef3d-428c-be25-fdb1e6fa75be.html), in the IKEA app in many countries. You scan your room with the app, erase what is there and place IKEA products from the catalog.

Whichever way you do it, use the picture to decide whether you like the room and the tape measure to decide what you buy. Before you order, also measure the front door, the hallway and the elevator the sofa has to come through.

[← All posts](https://lastres.ai/blog/)

---

Source: https://lastres.ai/blog/furnish-a-room-with-ai-and-ikea/
Site index for agents: https://lastres.ai/llms.txt
